montenegro
Enthusiast
- Messages
- 192
how many oil seals are there per side on a 354 gearbox ? and does anyone know where I can obtain them ?
- Thread starter montenegro
- Start date
Azazello
habitué
- Messages
- 1,109
- Location
- Italy
It should be the same that HA0 gearbox - so if your renault dealer tells you they're no more available, you know you can buy the ones for the more recent gearbox.
There is one oil seal and one o-ring per side; I changed mine about a month ago, if you need the renault cod. I should still have packages... Paid around 50 euros for all 4 pieces...
There is one oil seal and one o-ring per side; I changed mine about a month ago, if you need the renault cod. I should still have packages... Paid around 50 euros for all 4 pieces...
DavidN
Enthusiast
- Messages
- 488
"Der Franzose" or "CiPeRe" as they call their french based subsidiary has them.
www.franzose.de
www.cipere.fr
Unfortunately the O-Rings are only availlable in the complete gearbox-gasket-set.
#82425 - 18.90 Euro
The driveshaft seals are #81092 - 5,69 Euro each
Cheers,
David
www.franzose.de
www.cipere.fr
Unfortunately the O-Rings are only availlable in the complete gearbox-gasket-set.
#82425 - 18.90 Euro
The driveshaft seals are #81092 - 5,69 Euro each
Cheers,
David
Azazello
habitué
- Messages
- 1,109
- Location
- Italy
Very cheap...
Azazello
habitué
- Messages
- 1,109
- Location
- Italy
Can you give us the measure of this o-rings, if you know it? So we can bu them in advance, before dismounting the driveshafts...
Thank you Angel!
Azazello
habitué
- Messages
- 1,109
- Location
- Italy
Fast and precious as ever.
On franzose site the seals are measured as 36x54x7,5 but I do not know if this half millimeter makes a great difference.
petak
Enthusiast
- Messages
- 1,894
- Location
- Vodice, Croatia
I am sending you part numbers from original renault catalog for HA0 gear box
It is on Croatian but you can find dimensions according to numbers on document.
O-ring is 104/105x3 (it is wobbly so can not measure right)
And still can be found in Renault garage but are little bit pricey
Prices in Croatia are in table (In HR Kuna - divide by 9 and you will get GBP - approximately)
It is on Croatian but you can find dimensions according to numbers on document.
O-ring is 104/105x3 (it is wobbly so can not measure right)
And still can be found in Renault garage but are little bit pricey
Prices in Croatia are in table (In HR Kuna - divide by 9 and you will get GBP - approximately)
If You buy industrie sealings, You have to ask for gearbox oil restistance. Sometimes it's really very difficoult to reasemble it. The O-Rings stick exaktly at the first thread turn. If it's to cold it sometimes doesn't work. You can use the old O-Rings ansd seal it with loctite.