Hi I'm new to the forum & I have a project on the go I have a gearbox from what I was told was from a renault 5 gordini/apline turbo what's the best way to Identify the box I know it takes the 190mm clutch is 5 speed & from the only info I've found so that's not helped me the big Question I need answered is does anyone have a flywheel to sell me or can the please tell me if the face of it should be flat or is Stepped if so by how much
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Hello & can anyone help me
- Thread starter Griffo7r
- Start date
montenegro
Enthusiast
- Messages
- 192
does it split down the middle ? if so it's a alpine/gordini box
Yer the box splits down the centre it has the smallest first Motion shaft of all the boxs I've managed to trace (17.5mm with 20 teeth & the clutch plate is 190mm in Diameter)The real problem I have is not having a fly wheel or having seen one can anyone please tell me if the clutch mounting face is flat or stepped & if so by how much
Hi - have you asked the question on my site,
www.r5gordini.co.uk ?
I see you have also registered for my r5turbo.info site. I have only just activated your account - sorry about that!
Andrew
www.r5gordini.co.uk ?
I see you have also registered for my r5turbo.info site. I have only just activated your account - sorry about that!
Andrew