Malcolm Brown
Enthusiast
- Messages
- 51
- Location
- Cellefrouin France
Hi all, My 1981 R4 GTL, (fitted with a 1985 engine) will only run on lots of choke, If I close the choke, the motor dies.
The timing is spot on (7degs b4 TDC) and the points are too (0.4mm)
The carb is a V.0. 5 073A 81.11,,, however the manual shows a V.0. 5 83A.
Any ideas as to what the solution is?
I have dismantled said carb and cleaned the jets, bowl and the inline gauze filter, to no avail.
Stupidly enough, it was fine before it went to the paint shop for respray. Guess I should'nt have had him resprayed!
HELP!!!!
The timing is spot on (7degs b4 TDC) and the points are too (0.4mm)
The carb is a V.0. 5 073A 81.11,,, however the manual shows a V.0. 5 83A.
Any ideas as to what the solution is?
I have dismantled said carb and cleaned the jets, bowl and the inline gauze filter, to no avail.
Stupidly enough, it was fine before it went to the paint shop for respray. Guess I should'nt have had him resprayed!
HELP!!!!